The 85B on-grade drill can work in areas as tight as a 30 inch trench, and it can center on slabs as thick as 2 feet. Operators can equip the drill with 5/8- to 2-inch diameter bits and drill to 9-inch depths. The compact unit weighs only 85 pounds, so it’s easy to reposition, load and unload. Install E-Z Drill’s optional wheels for even faster repositioning. And for greater versatility on projects that require vertical drilling, users also can install the optional vertical conversion kit.

Vertical Conversion Kit – Drill vertical holes quickly and accurately.

e-z-drill-85B-vertical-conversion-kit

Wheel Kit – Allow for fast and easy repositioning.

e-z-drill-65b-mobile-system

Horizontal Drilling

Vertical Drilling

e-z-drill-85B-vertical-conversion-kit

Industrial Utility

e-z-drill-85B-industrial-utility

+ OPTIONS

Vertical Conversion Kit – Drill vertical holes quickly and accurately.

e-z-drill-85B-vertical-conversion-kit

Wheel Kit – Allow for fast and easy repositioning.

e-z-drill-65b-mobile-system

+ CONFIGURATIONS

Horizontal Drilling

Vertical Drilling

e-z-drill-85B-vertical-conversion-kit

+ APPLICATIONS

Industrial Utility

e-z-drill-85B-industrial-utility

Download Printable Spec Sheet

e-z-drill-85B-application bonne pickens stadium
E-Z Drill 65B on-grade concrete drill specs

Horizontal Position

yellow bar

Lower Length (A)30 in (76.2 cm)
Width12 in (30.5 cm)
Height (B)22 in (55.9 cm)
Weight85 lbs (38.6 kg)
Drill Distance From Corner6 in (15.2 cm)
Drill Distance From Ground1 in (2.5 cm)
Drill Depth (std.)9 in (20.3 cm)
Drill Bit Diameter5/8 in to 2 in (15.9 mm to 50.8 mm)
Drill Motor (pneumatic)CP 14
Drill Motor Weight16 lbs (7.62 kg)
Chuck Size (std.)7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
Air Consumption (minimum)32 cfm (0.9 m 3 /min)
Operating Pressure90 psi (6.2 bar)
Impact (ft. lbs./blow)14 fpb (19 J)
Hammer Speed2900 bpm
Speed150 rpm

Vertical Position

yellow bar

Lower Length (A)N/A
Width12 in (30.5 cm)
Height (B)N/A
Weight85 lbs (38.6 kg)
Drill Distance From CornerN/A
Drill Distance From GroundUp to 6 in (15.2 cm)
Drill Depth (std.)9 in (20.3 cm)
Drill Bit Diameter5/8 in to 2 in (15.9 mm to 50.8 mm)
Drill Motor (pneumatic)CP 14
Drill Motor Weight16 lbs (7.62 kg)
Chuck Size (std.)7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
Air Consumption (minimum)32 cfm (0.9 m 3 /min)
Operating Pressure90 psi (6.2 bar)
Impact (ft. lbs./blow)14 fpb (19 J)
Hammer Speed2900 bpm
Speed150 rpm