With the 210-5 EQ MT you can drill five holes at once and quickly reposition the drill using the fingertip controls to shift it left or right. Like all of E-Z Drill’s equipment-mounted models, the 210-5 EQ MT can drill to 18 inches deep. You can power it with a 500 cfm air compressor or with our 120-gallon air tank and a 375 cfm air compressor. The drill features a safety swivel lock that secures it for safe transportation from patch to patch.

Air Tank – Reduce air requirements with the 120-gallon air tank that can be used with a 375 cfm air compressor to operate all five drills.

E-Z Drill 210-5 EQMT equipment mounted concrete dowel pin drill air-tank

Horizontal Drilling

Full-Depth Repair

E-Z Drill 210-5 EQMT equipment mounted concrete dowel pin drill full depth repair

OPTIONS

Air Tank – Reduce air requirements with the 120-gallon air tank that can be used with a 375 cfm air compressor to operate all five drills.

E-Z Drill 210-5 EQMT equipment mounted concrete dowel pin drill air-tank

CONFIGURATIONS

Horizontal Drilling

APPLICATIONS

Full-Depth Repair

E-Z Drill 210-5 EQMT equipment mounted concrete dowel pin drill full depth repair

Download Printable Spec Sheet

E-Z Drill 210-5 EQMT equipment mounted concrete dowel drill
E-Z Drill 210-5 EQMT equipment mounted concrete dowel pin drill specifications

Horizontal Position

bar

Lower Length (A)47 in (119.4 cm)
Overall Length (A) + (B)91 in (231.1 cm)
Frame Length (B)44 in (111.8 cm)
Width47 in (119.4 cm)
Height35 in (88.9 cm)
Weight1900 lbs (862.6 kg)
Drill Distance From Corner6 in (15.2 cm)
Drill Distance From Ground3 in (7.6 cm)
Drill Depth (std.)18 in (45.7 cm)
Drill Bit Diameter5/8 in to 2 1/2 in (15.9 mm to 63.5 mm)
Drill Motor (pneumatic)CP 32A
Drill Motor Weight54 lbs (24.5 kg)
Chuck Size (std.)7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
Air Consumption (minimum)500 cfm (14.0 m 3 /min)
Operating Pressure90 psi (6.2 bar)
Impact (ft. lbs./blow)36 fpb (49 J)
Hammer Speed2200 bpm
Speed288 rpm