Patented Roller Bearing Feed
Minimizes friction for faster drilling.
Quick Release Bit Guide
Fast and easy change outs of one-piece bits, bushings and drill steel.
Auto-Alignment
Allows for faster repositioning after each hole set for increased productivity.
With the 210B SRA slab rider, you can stitch or drill horizontally, vertically or at an angle with exceptional accuracy and no disturbance to the subgrade. The unit can drill 5/8- to 2-1/2-inch-diameter holes to 18-inch depths, and it has an auto-alignment feature that tracks the hole placement level for fast and easy repositioning. A roller bearing feed system provides friction-free drilling for longer wear life, less maintenance and minimized downtime.
Dust Collection System – Minimize dust with this totally pneumatic system.
Horizontal Drilling
Vertical Drilling
Modified Mast
Mast Extension
Skew Drilling
Stitching
Airports
Lane Additions
Full-Depth Repair
- OPTIONS
-
Dust Collection System – Minimize dust with this totally pneumatic system.
- CONFIGURATIONS
-
Horizontal Drilling
Vertical Drilling
Modified Mast
Mast ExtensionSkew Drilling
Stitching
- APPLICATIONS
-
Airports
Lane Additions
Full-Depth Repair
Horizontal Position
| Lower Length (A) | 46 in (116.8 cm) |
| Overall Length (A) + (C) | 94 in (238.8 cm) |
| Cart Length (C) | 48 in (121.9 cm) |
| Wheel Base (D) | 42 in (106.7 cm) |
| Width | 32 in (81.3 cm) |
| Height (E) | 32 in (81.3 cm) |
| Weight | 385 lbs (174.8 kg) |
| Drill Distance From Corner | 6 in (15.2 cm) |
| Drill Distance From Ground | 3 in (7.6 cm) |
| Drill Depth (std.) | 18 in (45.7 cm) |
| Drill Bit Diameter | 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm) |
| Drill Distance From Wheel to Center of Bit (F) | N/A |
| Drill Motor (pneumatic) | CP 32A |
| Drill Motor Weight | 54 lbs (24.5 kg) |
| Chuck Size (std.) | 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm) |
| Air Consumption (minimum) | 100 cfm (2.8 m 3 /min) |
| Operating Pressure | 90 psi (6.2 bar) |
Vertical Position
| Lower Length (A) | N/A |
| Lower Length (A) + (C) | 73 in (185.4 cm) |
| Cart Length (C) | 54 in (137.2 cm) |
| Wheel Base (D) | 48 in (121.9 cm) |
| Width | 54 in (137.2 cm) |
| Height (E) | Varies |
| Weight | 1,150 lbs (522.1 kg) |
| Drill Distance From Corner | N/A |
| Drill Distance From Ground | Up to 12 in (30.5 cm) |
| Drill Depth (std.) | 18 in (45.7 cm) |
| Drill Bit Diameter | 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm) |
| Distance From Wheel to Center of Bit (F) | 21 1/2 in (54.6 cm) |
| Drill Motor (pneumatic) | CP 32A |
| Drill Motor Weight | 54 lbs (24.5 kg) |
| Chuck Size (std.) | 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm) |
| Air Consumption (minimum) | 100 cfm (2.8 m 3/min) |
| Operating Pressure | 90 psi (6.2 bar) |
| Impact (ft. lbs./blow) | 36 fpb (49 J) |
