Achieve greater efficiency with the 110B single-gang, on-grade drill that’s equipped with dual-purpose guide wheels to quickly transition from riding along the face of the slab to moving around the jobsite. The drill operates on the subgrade and fits in a 3-foot patch. A minimum of 50 cfm is required to run the totally pneumatic system, which can drill holes as deep as 12 inches in diameters of 5/8 of an inch to 2 inches. Users can install the optional hole spacing guide, which clearly indicates where to place the 170-pound drill, for even greater accuracy and efficiency when repositioning.

Vertical Conversion Kit Drill vertical holes quickly and accurately.

E-Z Drill 110B on-grade concrete dowel drill vertical conversion kit

Horizontal Drilling

Vertical Drilling

e-z-drill-110B-vertical-conversion-kit

Leg Extensions

Lane Additions

e-z-drill-110B-lane-additions

Full-Depth Repair

E-Z Drill 110B on-grade concrete dowel pin drill full depth repair

+ OPTIONS

Vertical Conversion Kit Drill vertical holes quickly and accurately.

E-Z Drill 110B on-grade concrete dowel drill vertical conversion kit

+ CONFIGURATIONS

Horizontal Drilling

Vertical Drilling

e-z-drill-110B-vertical-conversion-kit

Leg Extensions

+ APPLICATIONS

Lane Additions

e-z-drill-110B-lane-additions

Full-Depth Repair

E-Z Drill 110B on-grade concrete dowel pin drill full depth repair

Download Printable Spec Sheet

curb and gutter preparation for pour
E-Z Drill 110B on-grade concrete dowel drill specs

Horizontal Position

yellow bar

Lower Length (A)41 3/8 in (105.1 cm)
Lower Length w/ Back Wheel Removed34 3/4 in (88.3 cm)
Width (B)12 in (30.5 cm)
Height (C)29 in (73.7 cm)
Weight170 lbs (77.2 kg)
Drill Distance From Corner6 in (15.2 cm)
Drill Distance From Ground3 in (7.6 cm)
Drill Depth (std.)12 in (30.5 cm)
Drill Bit Diameter5/8 in to 2 in (15.9 mm to 50.8 mm)
Drill Motor (pneumatic)CP 22
Drill Motor Weight28 lbs (12.7 kg)
Chuck Size (std.)7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
Air Consumption (minimum)50 cfm (1.4 m 3 /min)
Operating Pressure90 psi (6.2 bar)
Impact (ft. lbs./blow)24 fpb (32.6 J)
Hammer Speed2600 bpm
Speed210 rpm

Vertical Position

yellow bar

Lower Length (A)N/A
Lower Length w/ Back Wheel RemovedN/A
Width (B)12 in (30.5 cm)
Height (C)N/A
Weight170 lbs (77.2 kg)
Drill Distance From CornerN/A
Drill Distance From GroundUp to 12 in (7.6 cm)
Drill Depth (std.)12 in (30.5 cm)
Drill Bit Diameter5/8 in to 2 in (15.9 mm to 50.8 mm)
Drill Motor (pneumatic)CP 22
Drill Motor Weight28 lbs (12.7 kg)
Chuck Size (std.)7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
Air Consumption (minimum)50 cfm (1.4 m 3 /min)
Operating Pressure90 psi (6.2 bar)
Impact (ft. lbs./blow)24 fpb (32.6 J)
Hammer Speed2600 bpm
Speed210 rpm