The 65B on-grade drill can fit in areas as narrow as 24 inches for drilling in even the most compact spaces. One person can easily reposition, load and unload the lightweight, 65-pound unit, and the optional pneumatic tires allow for even faster repositioning and greater productivity. And for more versatility on projects that require vertical drilling, you can install the optional vertical conversion kit.

Vertical Conversion Kit – Drill vertical holes quickly and accurately.

e-z-drill-65B-vertical-configuration

 

Wheel Kit – Allow for fast and easy repositioning.

e-z-drill-65B-mobile-system

Horizontal Drilling

Vertical Drilling

e-z-drill-65B-vertical-configuration

Industrial Utility

e-z-drill-65B-mobile-system

OPTIONS

Vertical Conversion Kit – Drill vertical holes quickly and accurately.

e-z-drill-65B-vertical-configuration

 

Wheel Kit – Allow for fast and easy repositioning.

e-z-drill-65B-mobile-system

CONFIGURATIONS

Horizontal Drilling

Vertical Drilling

e-z-drill-65B-vertical-configuration

APPLICATIONS

Industrial Utility

e-z-drill-65B-mobile-system

Download Printable Spec Sheet

e-z-drill-65B road full depth repair
E-Z Drill 65B on-grade concrete drill specs

Horizontal Position

bar

Lower Length w/8 in. dd (A)24 in (60.9 cm)
Width12 in (30.5 cm)
Height (B)22 in (55.9 cm)
Weight65 lbs (29.5 kg)
Drill Distance From Corner6 in (15.2 cm)
Drill Distance From Ground1 in (2.5 cm)
Drill Depth (std.)8 in (20.3 cm)
Drill Bit Diameter1/2 in to 7/8 in (12.7 mm to 22.2 mm)
Drill Motor (pneumatic)CP 9C
Drill Motor Weight8 lbs (3.63 kg)
Chuck Size (std.)3/4 in x 3 3/4 in (19.1 mm x 95.3 mm)
Air Consumption (minimum)20 cfm (.56 m 3 /min)
Operating Pressure80 psi (5.5 bar)
Impact (ft. lbs./blow)3.5 fpb (4.8 J)
Hammer Speed3400 bpm
Speed180 rpm

Vertical Position

yellow bar

Lower Length w/8 in. dd (A)NA
Width12 in (30.5 cm)
Height (B)NA
Weight65 lbs (29.5 kg)
Drill Distance From CornerNA
Drill Distance From Groundup to 6 in (15.2 cm)
Drill Depth (std.)8 in (20.3 cm)
Drill Bit Diameter1/2 in to 7/8 in (12.7 mm to 22.2 mm)
Drill Motor (pneumatic)CP 9C
Drill Motor Weight8 lbs (3.63 kg)
Chuck Size (std.)3/4 in x 3 3/4 in (19.1 mm x 95.3 mm)
Air Consumption (minimum)20 cfm (.56 m 3 /min)
Operating Pressure80 psi (5.5 bar)
Impact (ft. lbs./blow)3.5 fpb (4.8 J)
Hammer Speed3400 bpm
Speed180 rpm