Use the 20 UTL to increase safety and speed on vertical drilling projects. The frame-mounted drill absorbs vibrations to prevent hand, arm and back injuries commonly associated with handheld drilling. Operators can use the 20 UTL in a variety of applications, such as pinpointing gas leaks, where speed, precision and safety are paramount. Users can drill 5/8- to 2-1/2-inch holes as deep as 18 inches with a minimum of 100 cfm. We also can configure the 20 UTL to drill several feet deep for specific application requirements.

Vertical Drilling

Wheel Modifications

e-z-drill-20-utl-wheel-modification

Industrial Utility
Gas Leak Dectection

e-z-drill-20-utl-industrial-utility

CONFIGURATIONS

Vertical Drilling

Wheel Modifications

e-z-drill-20-utl-wheel-modification

APPLICATIONS

Industrial Utility
Gas Leak Dectection

e-z-drill-20-utl-industrial-utility

Download Printable Spec Sheet

gas leak detection drill
gas leak pinpointing drill

Vertical Position

line

Lower Length (C)32 1/2 in (82.6 cm)
Wheel Base (B)29 in (73.7 cm)
Height (A)50 in (127.0 cm)
Weight207 lbs (94 kg)
Drill Distance From CornerN/A
Drill Distance From GroundN/A
Drill Depth (std.)18 in (45.7 cm)
Drill Bit Diameter5/8 in to 2 1/2 in (15.9 mm to 63.5 mm)
Drill Motor (pneumatic)CP 32A
Drill Motor Weight54 lbs (24.5 kg)
Chuck Size (std.)7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
Air Consumption (minimum)100 cfm (2.8 m 3 /min)
Operating Pressure90 psi (6.2 bar)
Impact (ft. lbs./blow)36 fpb (49 J)
Hammer Speed2200 bpm
Speed288 rpm