Drill 5/8- to 2-1/2-inch holes 18 inches deep in a 4-foot patch with the only on-grade drill on the market with these capabilities – the 210B. It requires just 100 cfm to operate, and the dual-purpose guide wheels transition simply from on-grade positioning to easy transportation around the jobsite. With its adjustable drill height you can drill into the center of slabs that are 6 to 24 inches thick.

Vertical Conversion Kit – Drill vertical holes quickly and accurately.E-Z Drill 210B-2 on-grade concrete drill vertical-conversion-kit 2

Horizontal Drilling

Vertical Drilling

E-Z Drill 210B-2 on-grade concrete drill vertical-conversion-kit 2

24-Inch Depth with Leg Extensions
E-Z Drill 210B-2 concrete drill 24inch-configuration

Aerial Work Platform Mounted

e-z-drill-210B-aerial-mounted

30-Inch Depth
e-z-drill-210B-30inch-configuration

Airports

Lane Additions

E-Z Drill 240B on-grade concrete drill airport-and-lane-additions

Full-Depth Repair

E-Z Drill 210B-2 on-grade concrete drill full-depth-repair

+ OPTIONS

Vertical Conversion Kit – Drill vertical holes quickly and accurately.E-Z Drill 210B-2 on-grade concrete drill vertical-conversion-kit 2

+ CONFIGURATIONS

Horizontal Drilling

Vertical Drilling

E-Z Drill 210B-2 on-grade concrete drill vertical-conversion-kit 2

24-Inch Depth with Leg Extensions
E-Z Drill 210B-2 concrete drill 24inch-configuration

Aerial Work Platform Mounted

e-z-drill-210B-aerial-mounted

30-Inch Depth
e-z-drill-210B-30inch-configuration

+ APPLICATIONS

Airports

Lane Additions

E-Z Drill 240B on-grade concrete drill airport-and-lane-additions

Full-Depth Repair

E-Z Drill 210B-2 on-grade concrete drill full-depth-repair

Download Printable Spec Sheet

full depth concrete patch highway repair
E-Z Drill 210B concrete dowel pin drill specifications

Horizontal Position

bar

Lower Length (A)51 3/8 in (130.5 cm)
Lower Length w/ Back Wheel Removed46 in (116.8 cm)
Width (B)12 in (30.5 cm)
Height (C)30 in (76.2 cm)
Weight285 lbs (129.4 kg)
Drill Distance From Corner6 in (15.2 cm)
Drill Distance From Ground3 in (7.6 cm)
Drill Depth (std.)18 in (45.7 cm)
Drill Bit Diameter5/8 in to 2 1/2 in (15.9 mm to 63.5 mm)
Drill Motor (pneumatic)CP 32A
Drill Motor Weight54 lbs (24.5 kg)
Chuck Size (std.)7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
Air Consumption (minimum)100 cfm (2.8 m 3 /min)
Operating Pressure90 psi (6.2 bar)
Impact (ft lbs/blow)36 fpb (49 J)
Hammer Speed2200 bpm
Speed288 rpm

Vertical Position

bar

Lower Length (A)N/A
Lower Length (C)N/A
Overall (A)N/A
WidthN/A
Height (B)N/A
Weight710 lbs (322.3 kg)
Drill Distance From CornerN/A
Drill Distance From GroundUp to 12 in (30.5 cm)
Drill Depth (std.)18 in (45.7 cm)
Drill Bit Diameter5/8 in to 2 1/2 in (15.9 mm to 63.5 mm)
Drill Motor (pneumatic)CP 32A
Drill Motor Weight54 lbs (24.5 kg)
Chuck Size (std.)7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
Air Consumption (minimum)200 cfm (5.6 m 3 /min)
Operating Pressure90 psi (6.2 bar)
Impact (ft. lbs./blow)36 fpb (49 J)
Hammer Speed2200 bpm
Speed288 rpm